Filter by
Loading...
Refractory materials (kiln furniture & accessories) for ceramic kilns.
Kiln shelves (square and circular), props, castle props, stilts, tile cranks, plate setters, jewelry rack, Glass Separator, Orton Cones ans with Self Support.
Refractory tubes diameter 10 to 40 mm
Refractory materials (kiln furniture & accessories) for ceramic kilns.
Kiln shelves (square and circular), props, castle props, stilts, tile cranks, plate setters, jewelry rack, Glass Separator, Orton Cones ans with Self Support.
Refractory tubes diameter 10 to 40 mm
Subcategories
Wide range of tripods, rooster legs, allowing you to carry out and particularize the charging of your kiln.
We also offer plate holders, as well as a set of low and high temperature jewelry holders.
Bar or rod in refractory steel for low temperature and high temperature alumina for firing support for ceramic parts such as jewelry.
Cone and temperature control rings or disc
Fuse Cone allow you to check that the temperature has been reached.
It is preferable to use 3 cones of different temperature, for example for cooking at 1280 ° C, use the free-standing watch N ° 8 (1271 ° C) N ° 9 (1280 ° C) and N ° 10 (1310 ° C) so you will have a precise idea of the temperature reached.
The Temperature Control Ring allows cooking control, recording very precisely the heat actually received by the fired part, both by radiation and by heat transfer.
The rings can be placed on the charging plates, on the parts themselves or next to the temperature sensor to control it.
The measurement of the diameter of the ring, after cooling the oven, gives you the temperature reached by the oven in the area where the ring is placed.
Kiln castellated prop (Interlocking Hollow Support), charging plate support, refractory 1320 ° C max
These pins (Castellated Prop 1½) are superimposed, to allow you to separate the oven plates at the desired height.
Round refractory keel (tubular kiln props) , shelf support, in Alcorit 1350 ° C
1400 ° C type 60 Kiln resistance support tube
Diameter from 10 mm to 40 mm
Length 450mm to 1600mm or cut on demand.
Refractory gazettes for cooking ceramic tiles.
Maximum temperature 1250 ° C
Charging refractory plates for kiln (Shelve Batt).
Refractory plate Alcorite 1280 ° C, Mulcorit 1340 ° C, Silicon carbide recrystallized 1600 ° C or not recrystallized 1400 ° C.
Square, rectangular and round format.
Cut on demand.
Glue and refractory mortars adhesive.
Glue paste 1450 ° C and 1600 ° C, refractory concrete powder 1300 ° C, insulating paste cartridge 1400 ° C for repairing cracks and slip for charging (engobe) plate.
REFRACTORY STAINLESS STEEL 1200 ° C L 200 x 4 MM Bar L 200 x 4 mm for 1200°C REFRACTORY STAINLESS STEEL 1200 ° Cbar length 200 mm x diameter 4 mm.Rod 1200 ° C maximum beyond a slight deformation appearsIdeal for baking beads and ceramic jewelry
DOUBLE PARALLEL SUPPORT REFRACTORY 1340°CRef : DOUSUPPARDelivered with 2 refractory supports L 60 x H 60 mm 5 bars of Ø2+3+1 of 4 mm in 200mm length
INSULATING SEALANT CARTRIDGE 1400 ° C MAX Pasty insulating sealant cartridge to fill the crack in your furnace 1400 ° C/2552°F max
Refractory metal stilts T° 1200°C D 130 mm Ref : SUP130MR
Gazette double tile 100x100x12mm, 2 x 12 tiles Refractory gazette 1250°C
saggars Tile crank single 150x150x12mm tiles, 15 tiles. Temp 1260 ° C max
TILE CRANK SIMGLE 200*200*10 MM 1260°C Tile crank simgle tiles 200x200x12 mm, or 11 tiles. Temp 1260 ° C max
Silicon Carbide bar 30x30x1500mm recommended for maximum temperature of 1350 °C
Silicon Carbide bar 40 x 40 x 2000 mm for maximum temperature of 1350 °C
Pillars - Props Temp 1350 ° C - H 100mm Ø 43mm Fragile material, can not be sent by post.
REFRACTORY PILLAR H 800mm Diam.43 mm 1350°C Pillars - Props Temp 1350 ° C - H 800mm Ø 43mm Fragile material, can not be sent by post.