Filter by
Loading...
Equipment for gas ceramic kiln
Gas burner and Raku kit, temperature probe, type K or S compensation cable.
Temperature indicator, gas connection, pressure gauge and pressure regulator.
Equipment for gas ceramic kiln
Gas burner and Raku kit, temperature probe, type K or S compensation cable.
Temperature indicator, gas connection, pressure gauge and pressure regulator.
Subcategories
Gas burners and accessories
Fittings, valves, solenoid valves and gas pipes
Gas pressure regulator
Complete kit for Raku propane burner
Temperature probe type K 1200 ° C (low temperature type earthenware) and S 1400 ° C (high temperature type stoneware or porcelain)
Protective refractory sheath for temperature probe
Compensation cable for type K or S temperature probe
Complete battery-powered temperature kit.
Type K 1200 ° C earthenware or Raku or type S 1400 ° C stoneware or porcelain
Replacement probe or thermocouple type K 1200 ° C for earthenware or Raku and type S 1400 ° C for stoneware or porcelain
Spare digital temperature indicator thermometer.
Type K 1200 ° C max
Type S 1400 ° C max
Always pair the thermometer with the corresponding probe.
Compensating cable shielded probe S type 1400 ° C - the ml
Compensating cable shielded K probe Type K 1200 ° C - the ml
Complete raku burner kit including : the regulator with bits of pipe connections + 3m + 1 burner gas 42kW right: assembled kit comes with safety burner, pilot flame and stop valve. Lien vidéo : http://www.youtube.com/v/0CC88DUwL7A&hl=fr&fs=1></param><paramOr on YouTube Ref : solargil r440
Ralu kit 52 KW including : the pressure controller and manometer + 3m tubes + 1 burner R440-52kW right The R-440 burner is kit comes with safety burner, pilot flame and stop valve.Vidéo : http://www.youtube.com/watch?v=0CC88DUwL7A&feature=relmfuOr on YouTube : solargil r440
GAS BURNER R440 POWER 42 KW PROPANE Burner design completely in stainless. With pilot flame safety valve for setting a very fine flame.
BURNER R440 ELBOW POWER 42 KW Burner design completely in stainless.
R-441 Gas burner right all steel with ignition pilot burner. With flame protection + pilot needle valve for adjustment of great finesse of the flame. Injector 2.7 mm / 116 KW. Head DIAMET 70 mm<s
Burners R-441 curve 90 ° design entirely steel with ignition burner. With flame protection + pilot needle valve for adjustment of great finesse of the flame. Injector 2.7 mm / 116 KW. Head D
Injector gas burner 440. Specify the model of burner 440. The 42 KW: 1.5 mm injector. The 52 KW: 2.5 mm injector. Special kit Bell 110 Liters Oven Raku: 1 mm injector. Other sizes available upon request.
Complet kit Including, the probe type thermometer + K (1200 ° C) 250mm long + 3m compensating cable. This kit comes fully assembled. Without batteries