This is a set of specific glazes for the Cuerda Seca technic. Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions. Inside these plans, you put glazes with brushes or with syringe. Colors are used deluted with water in order to obtain a thick mix. Colors don't flow, even used in the vertical way.
Firing Temperature : 980°C
Firing temperature : 980°C
CUERDA SECA or PARTITIONED GLAZE Here is a series of special enamels for the technique of EMAUX CLOISONNES or CERDA SECA.
References F4312 Black and F4313 White are powders to be mixed with Copaïva balm to make the tracings of the partitions.
The enamels are applied with a brush or a pear. The colors are used diluted with water to obtain a thick mixture.
The CS 200 series can be used on a red support: these are opaque enamels.
The CS 400 series can be used on clear or white substrates: these are transparent glazes.
All colors are miscible with the exception of CS-210 red and CS-211 orange.
These colors do not flow, even when used vertically.