Top sellers

per page
Showing 1513 - 1524 of 2050 items
  • SERIFIX Fixative for decoration on unfired glaze Ref : DECAN

  • DIGITAL PORTABLE LABORATORY SCALE 2000 G / 1 G Maximum range 2000 g / Accuracy 1 g - DCT2000

    175,20 €
  • Green persian D96   Colors to paint D Set. These products are a range of a very fine colouring oxides with the fondant incorporated in the formula. Possibility to mix them to change the shades. Usable under glaze or on it. Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis   Firing...

  • Copper ochre D72 COLOR D72 COPPER OCHRE Colors to paint D Set. These products are a range of a very fine colouring oxides with the fondant incorporated in the formula. Possibility to mix them to change the shades. Usable under glaze or on it. Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white...

  • Middle blue D26   Colors to paint D Set. These products are a range of a very fine colouring oxides with the fondant incorporated in the formula. Possibility to mix them to change the shades. Usable under glaze or on it. Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis.   Firing...

  • COLOR D03 BEIGE Beige D03   Colors to paint D Set. These products are a range of a very fine colouring oxides with the fondant incorporated in the formula. Possibility to mix them to change the shades. Usable under glaze or on it. Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis....

  • Matt dark pink satin opaque enamel - CSM 119 This is a collection of matt colored enamels prepared for the "cuerda seca" technique. CSM-100 series matt enamels for cuerda seca can be used for white and red paste. The recommended firing temperature is 980ºC-1000ºC.  

  • Matt light pink opaque enamel - CSM 118 This is a collection of matt colored enamels prepared for the "cuerda seca" technique. CSM-100 series matt enamels for cuerda seca can be used for white and red paste. The recommended firing temperature is 980ºC-1000ºC.  

  • Black CS451   This a set of specific glazes for the Cuerda Seca technic. Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions. Inside these plans, you put glazes with brushes ou with syringe. Colors are used deluted with water to obtain a thick mix. CS200 is usable on red bisqueware : they are opaque. CS set400 is...

  • Dark brown - CS 213 This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette. Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure. To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.

  • 4 POLE 40 A 4 POLE CONTACTORContactor coil A1, A2 with 220V coil.Ref : CONTACTOR40 Contactor 40 Amp  

    101,64 €
  • 6402 ultramarine blue N°2 Pigment obtained by a succession of chemical reaction.  In powder at a dry state

Showing 1513 - 1524 of 2050 items