RSH1000
KILN RSH1000 L- 5 SIDES HEATING 1320°C - 2408°C FRONT LOADER
The RSH 1000 Frontloader has a volume of 1000 litres and is a kiln from the RSH series suitable for temperatures to 1320°C or 2408°F.
Kiln frontloaders from the RSH series comprise height models with kiln volumes between 150 and 1000 litres.
The heating elements are mounted on support rods. 3-side heating for the 100, 150 and 200 liters and 5-sides for de 300 to 1000 liters provides even temperature distribution throughout every performance range.
Special features of the RSH series:
Wire heating elements mounted on support rods
Suitable for demanding workshop and laboratory applications, as well as glass fusing.
Equipped with 3-zones.
Up to 5 firing programs, freely adjustable
Delayed start programmable
Up to 25 segments freely programmable
Availability date:
RSH1000 Frontloader
RSH1000 litres 1320°C or 2408°F (on request 1200°C)
Lining entirely in insulating refractory bricks type JM26 1430°C
5 heating faces 1320°C or 2408°C max, Kanthal A1 resistors mounted on tubes for 300 to 750 litres ovens
Electronic control SG930 with :
5 programmable curves with 25 segments each and delayed start.
3 control zones (high zone, middle zone and low zone)
Amperage indicator for each zone
Programming of time and date of start of cooking
Display of the constant temperature of the 3 zones and restart of the oven in case of power failure.
Electrical cut-off of the heating elements when the door is opened.
Delayed start, programmable time and temperature for each segment, adjustable baking stage and temperature.
3 "S" type thermocouples 1400°C
Programmable ventilation / cooling chimney.
Oven delivered with bottom plate(s), general power supply circuit breaker
Inside dimensions : W 1100 x D 900 x H 1000 mm
Outside dimensions : W 1700 x D 1700 x H 1900 mm
Minimum external dimensions: W 1660 x D 1450* x H 1740** mm
*Door removed
**Feet and chimney removed
Power 57 KW in 400 V
Weight 1350 kg
4 refractory plates of 500 x 450 x 15 mm each
NOTE :
Recommended electrical installation:
We recommend the installation of a 125 A circuit breaker with a 300mA differential
380V - 3 Phases + Neutral* + Earth
*For the power supply of the oven control system
Electrical cable with a section corresponding to the circuit breaker rating and the length of the installation (distance between the circuit breaker and the oven)
Connection of the oven to the electrical installation using a junction box
Translated with www.DeepL.com/Translator (free version)