Filter by
Loading...
CERAMIC GLAZE "CUERDA SECA" type
Enamels for the cloisonne technique
Transparent, opaque or matte plumbed enamel
Application with a brush or an engobe bulb.
Subcategories
Transparent enamels in powdered earthenware, glossy range
Opaque earthenware glazes in powder, glossy lead range
Opaque earthenware enamels in powder form, matte plumbed range
Matt water green opaque enamel - CSM 112 This is a collection of matt colored enamels prepared for the "cuerda seca" technique. CSM-100 series matt enamels for cuerda seca can be used for white and red paste. The recommended firing temperature is 980ºC-1000ºC.
Matt pistachio green opaque enamel - CSM 113 This is a collection of matt colored enamels prepared for the "cuerda seca" technique. CSM-100 series matt enamels for cuerda seca can be used for white and red paste. The recommended firing temperature is 980ºC-1000ºC.
Matt sky blue opaque enamel - CSM 115 This is a collection of matt colored enamels prepared for the "cuerda seca" technique. CSM-100 series matt enamels for cuerda seca can be used for white and red paste. The recommended firing temperature is 980ºC-1000ºC.
Matt black opaque enamel - CSM 117 This is a collection of matt colored enamels prepared for the "cuerda seca" technique. CSM-100 series matt enamels for cuerda seca can be used for white and red paste. The recommended firing temperature is 980ºC-1000ºC.
Matt light pink opaque enamel - CSM 118 This is a collection of matt colored enamels prepared for the "cuerda seca" technique. CSM-100 series matt enamels for cuerda seca can be used for white and red paste. The recommended firing temperature is 980ºC-1000ºC.
Matt dark pink satin opaque enamel - CSM 119 This is a collection of matt colored enamels prepared for the "cuerda seca" technique. CSM-100 series matt enamels for cuerda seca can be used for white and red paste. The recommended firing temperature is 980ºC-1000ºC.
Matt fluorescent yellow opaque enamel - CSM 101 This is a collection of matt colored enamels prepared for the "cuerda seca" technique. CSM-100 series matt enamels for cuerda seca can be used for white and red paste. The recommended firing temperature is 980ºC-1000ºC.
Matt cobalt blue opaque enamel - CSM 116 This is a collection of matt colored enamels prepared for the "cuerda seca" technique. CSM-100 series matt enamels for cuerda seca can be used for white and red paste. The recommended firing temperature is 980ºC-1000ºC.
Black partition F4312CD This a set of specific glazes for the Cuerda Seca technic. Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions. Inside these plans, you put glazes with brushes ou with syringe. Colors are used deluted with water to obtain a thick mix. CS200 is usable on red bisqueware : they are opaque. CS...